Notification example does not report updated values about ads HOT 3 CLOSED

Hi Ton,

please verify the adresses with our target browser (VS Menue/Scope/TargetBrowser). Furthermore provide WireShark Dump via Mail.

from ads.

Hi Sven,

I am seeing an error saying "Symbol could not be found" when i tried to open either the "plcTask" or "Port_851" sub items listed on my VS/scope/TargetBrowser).

Could you please help me with that .

from ads.

Hi Sven,

Yep that’s it, the address from the example is not in sync with the PLC Test project.
After updating the address in the example, the values are updated.

regards, Ton

From: Sven Oberschmidt [mailto:[email protected]]
Sent: Wednesday, October 28, 2015 3:22 PM
To: Beckhoff/ADS
Cc: Ton Willems
Subject: Re: [ADS] Notification example does not report updated values (#15)

Hi Ton,

please verify the adresses with our target browser (VS Menue/Scope/TargetBrowser). Furthermore provide WireShark Dump via Mail.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/15#issuecomment-151860034.

-- The information contained in this communication and any attachments is confidential and may be privileged, and is for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure or distribution is prohibited. Unless explicitly stated otherwise in the body of this communication or the attachment thereto (if any), the information is provided on an AS-IS basis without any express or implied warranties or liabilities. To the extent you are relying on this information, you are doing so at your own risk. If you are not the intended recipient, please notify the sender immediately by replying to this message and destroy all copies of this message and any attachments. The sender nor the company/group of companies he or she represents shall be liable for the proper and complete transmission of the information contained in this communication, or for any delay in its receipt.

from ads.