Comments (10)
Migrated from jadonk#33 (comment)
Originally created by @erikwelsh on Tue, 01 Nov 2016 19:06:23 GMT
Moved power connector in as much as possible. I think it should fit but will not know until we get the A2 boards back.
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jadonk on Wed, 02 Nov 2016 02:38:53 GMT
Still would like to find a shorter power connector.
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jadonk on Thu, 09 Feb 2017 22:27:55 GMT
@StrawsonDesign For rev B, can we switch the power input to a JST connector?
https://www.sparkfun.com/products/8734
I wonder how much it would cost to include that in the kit. :-/
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jadonk on Fri, 10 Feb 2017 13:27:12 GMT
Even if we included the cable?
On Feb 9, 2017, at 7:31 PM, StrawsonDesign [email protected] wrote:
Hmmmm, sorry but I really really like the universal barrel jack. We would
get so much pushback from people complaining about needing dedicated
adapters just to charge the thing just like Apple gets with their headphone
jack adapters. I do adore the Altoids tin concept, don't get me wrong! But
in practice I don't think anyone is running their board in a conductive
tin, whereas everyone will need to charge it and everyone with a wifi
router has one of these 12v dc wallwarts in their home already.Charging via a 9v or 12v capable USB-C connector may get initial pushback
too but at least that's looking a bit more towards a future universal
standard.Respectfully,
JamesOn 9 Feb 2017 2:27 pm, "Jason Kridner" [email protected] wrote:
@StrawsonDesign https://github.com/StrawsonDesign For rev B, can we
switch the power input to a JST connector?https://www.sparkfun.com/products/8734
I wonder how much it would cost to include that in the kit. :-/
―
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
jadonk#33 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AF9HoD6GTmkTX53KhxxFVraWTu7sq_Zgks5ra5LrgaJpZM4KVPuS
.―
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or mute the thread.
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jadonk on Thu, 08 Dec 2016 18:17:05 GMT
I've not been able to find a shorter jack, which is very surprising to me.
A2 still does NOT fit in an Altoids tin. :-(
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jonnycowboy on Wed, 16 Nov 2016 20:00:47 GMT
Would implementing issue 39 (new BMS) allow us to use a different power connector? Is the barrel jack currently used to charge the battery or is it used for directly powering the processor?
jadonk#39
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @StrawsonDesign on Fri, 10 Feb 2017 00:31:23 GMT
Hmmmm, sorry but I really really like the universal barrel jack. We would
get so much pushback from people complaining about needing dedicated
adapters just to charge the thing just like Apple gets with their headphone
jack adapters. I do adore the Altoids tin concept, don't get me wrong! But
in practice I don't think anyone is running their board in a conductive
tin, whereas everyone will need to charge it and everyone with a wifi
router has one of these 12v dc wallwarts in their home already.
Charging via a 9v or 12v capable USB-C connector may get initial pushback
too but at least that's looking a bit more towards a future universal
standard.
Respectfully,
James
On 9 Feb 2017 2:27 pm, "Jason Kridner" [email protected] wrote:
@StrawsonDesign https://github.com/StrawsonDesign For rev B, can we
switch the power input to a JST connector?https://www.sparkfun.com/products/8734
I wonder how much it would cost to include that in the kit. :-/
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
jadonk#33 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AF9HoD6GTmkTX53KhxxFVraWTu7sq_Zgks5ra5LrgaJpZM4KVPuS
.
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @jadonk on Mon, 07 Nov 2016 20:24:26 GMT
I've ordered some PCBs from OSH Park to do a mechanical mock-up to verify the fix. I've not identified a source of a shorter power connector.
from beaglebone-blue.
Migrated from jadonk#33 (comment)
Originally created by @StrawsonDesign on Thu, 17 Nov 2016 00:03:50 GMT
The barrel jack is primarily for charging the battery but can provide power to the 5V regulator when no battery is connected. We picked this connector because of how ubiquitous 12v wallwarts are with this 5.5mm barrel jack. I just wish there were half-length jacks available.
from beaglebone-blue.
For rev C, let's just use a single type-C connector for power. We'll need to either negotiate 20V or add a boost circuit for charging. I think negotiating 20V should be quite possible.
from beaglebone-blue.
Related Issues (20)
- Increase size of text HOT 2
- Drivers of the motors are insufficiently protected for over-current
- Do we keep WL1835 or move to WL1831? HOT 2
- eMMC/SD card goes into read only mode
- WiFi antenna attachment
- Battery drains when power is disabled
- MPU 9250 via SPI HOT 7
- Getting Started HOT 7
- The two black JST-SH connectors don't have a retention bed, unlike the white JST-SH connectors
- Beaglebone Blue: Pull PWM Pins Low on Boot
- Convert client port to OTG HOT 2
- Update to use lower-cost battery management
- Need spec on conformal coating HOT 4
- Add PDFs HOT 3
- Are alternate colors available for the JST connectors? HOT 4
- Please add one-liner module test for IMU and Barometer!
- Amperage consumption when operating on battery
- [Help Wanted] BeagleBone Blue Does Not Turn On (No LEDs nor USB Detection) HOT 2
- BBB GPIO and libgpiod
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from beaglebone-blue.