Unsupported Generic LED Function with Lighting Node PRO + Suuport for it? about opencorsairlink HOT 4 OPEN

LED protocol for the Lighting Node Pro (and the Commander Pro) isn't fully mapped yet.

from opencorsairlink.

I was going to ask a similar question, I guess... The error message is a bit different.
I'm a newbie in Linux and I made a mistake of buying 6 freaking LL fans which have RGB with it even tho I keep them black (no color) on windows.

I can see that it's recognizing the fans that are attached to the CoPro and the RPM of it unlike the creator of this topic.

aleczk@Aleczk:~/Downloads/OpenCorsairLink-testing$ sudo ./OpenCorsairLink.elf
Dev=0, CorsairLink Device Found: HX750i!
Dev=1, CorsairLink Device Found: Commander PRO!

aleczk@Aleczk:~/Downloads/OpenCorsairLink-testing$ sudo ./OpenCorsairLink.elf --device 1 --led channel=0, mode=2, colors=00FF00
Dev=0, CorsairLink Device Found: HX750i!
Dev=1, CorsairLink Device Found: Commander PRO!

Vendor: Corsair
Product: Commander PRO
Firmware: V0.9.212
Temperature 0:  0.00 C
Temperature 1:  0.00 C
Temperature 2:  0.00 C
Temperature 3:  0.00 C
Output 12v: 11.88 V
Output 5v:  4.98 V
Output 3.3v:  3.33 V
Fan 0:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 0
Fan 1:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 1429
Fan 2:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 1339
Fan 3:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 1490
Fan 4:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 1496
Fan 5:	Mode: Auto/Disconnected
	PWM: 0%
	RPM: 1490
Unsupported LED Function

Also I guess I screwed up the installation, kinda hard for me.

from opencorsairlink.

Di you manage to get anywhere with this @audiohacked ? Running elementaryOS 5.1 am in the testing branch but the LED side of the commander pro doesnt seem to be getting recognised

sudo ./OpenCorsairLink.elf --dev=0 --led channel=2,mode=0,colors=00FF00
Dev=0, CorsairLink Device Found: Commander PRO!

Vendor: Corsair
Product: Commander PRO
Firmware: V0.9.212
Temperature 0: 30.01 C
Temperature 1: 40.59 C
Temperature 2: 30.13 C
Temperature 3: 0.00 C
Output 12v: 12.14 V
Output 5v: 4.92 V
Output 3.3v: 0.66 V
Fan 0: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Fan 1: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Fan 2: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Fan 3: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Fan 4: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Fan 5: Mode: Auto/Disconnected
PWM: 50%
RPM: 0
Unsupported LED Function

from opencorsairlink.

I can confirm the observation of @kalinda99 and @BeardedDevCo. I have the Lightning Node Pro connected to my Commander Pro and the output is the same. Since development is moving to liquidctl it is likely that we will get the feature there.
If I have some spare time I might have a look at it. For now you can also try to use OpenRGB for the LEDs and OCL for fan speed.

from opencorsairlink.