ataberkoklu Goto Github PK

a_visible_light_communication_system

A Visible Light Communication System

arm-architecture

ARM based Low Power MicroController Implementation on FPGA platforms using Verilog

ataberkoklu.github.io

audio-frequency-based-stepper-motor-driver-on-arm

Audio Frequency Based Stepper Motor Driver on ARM (Assembly) with CMSIS DSP Implementation

binbloom

Raw binary firmware analysis software

keysim

ARM Cortex based STM32 MCU Project. The main purpose of the project is to allow the user assign Mouse and Keyboard Events to the Buttons' or IO Expanders' Trigger Events connected to the MCU. The MCU can be programmed by using KeySim-API program over UART. Moreover, The MCU acts as USB HID Device to send Keyboard and Mouse Reports to PC or CPU.

keysim-api

The API for the KeySim Project. This API is to program the MCU to perform each keys assigned actions via UART. The MCU is acting re-programmable USB HID device. The Main Project is below.

linear-mpc-lanekeeping-obstacleavoidance

Linear MPC for Lane Keeping and Obstacle Avoidance on Low Curvature Roads - Paper Application

modeluydu-stm32-altium

ModelUydu-STM32-Altium

noise_level_indicator_analog_circuit

Noise Level Detector - Analog Circuit

saleterminal

FPGA Based Point of Sale Project using Verilog

stm32-flysky-ibus

Telemetry application over RF (2.4 GHz) using FlySky Fs-i6x and STM32 Microcontroller

stm32-usb-hid

Mouse / Keyboard / TouchScreen USB HID Projects

stm32l476-bootloader

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

stmf746_tcp_bootloader

In-Application Programming Implementation using TCP IP Protocol