Raspberry Pi about rtl8812au HOT 6 CLOSED

Here's what I did to get it to compile on my Pi (some steps taken from here):

1. Download rpi-source [1]
   sudo wget https://raw.githubusercontent.com/notro/rpi-source/master/rpi-source -O /usr/bin/rpi-source && sudo chmod +x /usr/bin/rpi-source && /usr/bin/rpi-source -q --tag-update

2. Install bc (required by rpi-source)
   sudo apt-get install bc

3. Run rpi-source to get the required kernel headers
   rpi-source

4. Download the driver
   git clone https://github.com/astsam/rtl8812au.git

5. Make the driver
   make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm

6. Install the driver

   sudo make install
   sudo modprobe 8812au
   

from rtl8812au.

Run file 8812au.ko and attach output.

from rtl8812au.

What would be the make command or makefile adjustment to compile for arm v7? I can't find the architecture toggle for building on an arm system

from rtl8812au.

$ make KSRC=<path to kernel sources> CROSS_COMPILE=<appropriate cross compilation prefix> ARCH=arm

from rtl8812au.

4. Download the driver

Better use the branch v4.3.21
git clone -b v4.3.21 https://github.com/astsam/rtl8812au

from rtl8812au.

I am on a raspberry pi zero w ,

Make the driver
make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm

should I change the "arm-linux-gnueabihf- ARCH=arm" to "arm-linux-gnueabiel- ARCH=arm"

cause I am using armel not the armhf

from rtl8812au.