Meross Smart Hub (MSH300) bzw. Smart ThermoStat (MTS100) about iobroker.meross HOT 6 CLOSED

kannst Du die anderen DInge noch einfügen aus dem Thread? Die anderen messges und Deine Analyse

from iobroker.meross.

id wird wohl die ID des Thermostats sein. Ich habe seit 4-5 Tagen zwei davon probeweise im Einsatz und finde in den Logs auch zwei IDs.
"room":230 -> Vermutlich die gemessene Temperatur. Zumindest passt das zur eingestellten Temp. (23°) an einem der Thermostate.

Anmerkung: In dem Startlog findet sich ein "subdevice" mit der gleichen ID

Weitere Logeinträge:
2019-01-31 00:15:00.681 - [34mdebug[39m: meross.0 Device(2): 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":275,"comfort":240}]} 2019-01-31 00:15:00.682 - [34mdebug[39m: meross.0 Device: 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":275,"comfort":240}]} 2019-01-31 00:15:00.682 - [32minfo[39m: meross.0 Received unknown data Appliance.Hub.Mts100.Temperature: {"temperature":[{"id":"0000132D","room":275,"comfort":240}]} 2019-01-31 00:15:00.683 - [32minfo[39m: meross.0 Please send full line from logfile on disk to developer 2019-01-31 00:15:00.683 - [34mdebug[39m: meross.0 Device Raw: 1811068309697929086034298f17cdb2 - data: {"header":{"messageId":"0122e7cc04b16044ca106f5d9b664ad7","namespace":"Appliance.Hub.Mts100.Temperature","method":"PUSH","payloadVersion":1,"from":"/appliance/1811068309697929086034298f17cdb2/publish","timestamp":1548890100,"timestampMs":273,"sign":"b5e1ed16c5d74657f7b0c459fc99495d"},"payload":{"temperature":[{"id":"0000132D","room":275,"comfort":240}]}}

2019-01-31 00:22:11.317 - [34mdebug[39m: meross.0 Device(2): 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":250,"currentSet":180,"economy":180}]} 2019-01-31 00:22:11.317 - [34mdebug[39m: meross.0 Device: 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":250,"currentSet":180,"economy":180}]} 2019-01-31 00:22:11.317 - [32minfo[39m: meross.0 Received unknown data Appliance.Hub.Mts100.Temperature: {"temperature":[{"id":"0000132D","room":250,"currentSet":180,"economy":180}]} 2019-01-31 00:22:11.317 - [32minfo[39m: meross.0 Please send full line from logfile on disk to developer 2019-01-31 00:22:11.318 - [34mdebug[39m: meross.0 Device Raw: 1811068309697929086034298f17cdb2 - data: {"header":{"messageId":"02af0e73c957fbe427c8b28dde225e2d","namespace":"Appliance.Hub.Mts100.Temperature","method":"PUSH","payloadVersion":1,"from":"/appliance/1811068309697929086034298f17cdb2/publish","timestamp":1548890530,"timestampMs":640,"sign":"1fd5c37a7406c9894d0251e217e06303"},"payload":{"temperature":[{"id":"0000132D","room":250,"currentSet":180,"economy":180}]}}

In der App kann man 2 Temp. einstellen eben Economy und Comfort. Die sind bei mir 24 bzw. 18 Grad.
Ist evtl. die Meldung wenn die gemessene Temp. von der eingestellten abweicht.

Und das kam beim ändern der Zeitplanung heraus:

2019-01-31 00:18:03.555 - [34mdebug[39m: meross.0 Device(2): 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Schedule - data: {"schedule":[{"id":"0000132D","mon":[[390,1],[1050,0]],"tue":[[390,1],[1050,0]],"wed":[[390,1],[1050,0]],"thu":[[390,1],[1050,0]],"fri":[[390,1],[1050,0]],"sat":[[450,1],[990,0]],"sun":[[390,1],[1050,0]]}]} 2019-01-31 00:18:03.556 - [34mdebug[39m: meross.0 Device: 1811068309697929086034298f17cdb2 Appliance.Hub.Mts100.Schedule - data: {"schedule":[{"id":"0000132D","mon":[[390,1],[1050,0]],"tue":[[390,1],[1050,0]],"wed":[[390,1],[1050,0]],"thu":[[390,1],[1050,0]],"fri":[[390,1],[1050,0]],"sat":[[450,1],[990,0]],"sun":[[390,1],[1050,0]]}]} 2019-01-31 00:18:03.556 - [32minfo[39m: meross.0 Received unknown data Appliance.Hub.Mts100.Schedule: {"schedule":[{"id":"0000132D","mon":[[390,1],[1050,0]],"tue":[[390,1],[1050,0]],"wed":[[390,1],[1050,0]],"thu":[[390,1],[1050,0]],"fri":[[390,1],[1050,0]],"sat":[[450,1],[990,0]],"sun":[[390,1],[1050,0]]}]} 2019-01-31 00:18:03.556 - [32minfo[39m: meross.0 Please send full line from logfile on disk to developer 2019-01-31 00:18:03.556 - [34mdebug[39m: meross.0 Device Raw: 1811068309697929086034298f17cdb2 - data: {"header":{"messageId":"f832628746832d2ee8a352c473c2a589","namespace":"Appliance.Hub.Mts100.Schedule","method":"PUSH","payloadVersion":1,"from":"/appliance/1811068309697929086034298f17cdb2/publish","timestamp":1548890283,"timestampMs":49,"sign":"8e0f1efaf9653d6feac3ce798f423a28"},"payload":{"schedule":[{"id":"0000132D","mon":[[390,1],[1050,0]],"tue":[[390,1],[1050,0]],"wed":[[390,1],[1050,0]],"thu":[[390,1],[1050,0]],"fri":[[390,1],[1050,0]],"sat":[[450,1],[990,0]],"sun":[[390,1],[1050,0]]}]}}

from iobroker.meross.

Ok, dann schaue ich mal ... könntest Du mit den "temperature" Meldungen nochmal experimentieren?

also vor allem was kommt wenn die eingestellte temperatur von comfort und eco abweicht oder wenn es einem der beiden entspricht?

from iobroker.meross.

Summary:
Abilities:

"Appliance.Digest.Hub":{},"Appliance.Hub.Bind":{},"Appliance.Hub.Unbind":{},"Appliance.Hub.Online":{},"Appliance.Hub.ToggleX":{},"Appliance.Hub.Exception":{},"Appliance.Hub.Mts100.All":{},"Appliance.Hub.Mts100.TimeSync":{},"Appliance.Hub.Mts100.Mode":{},"Appliance.Hub.Mts100.Temperature":{},"Appliance.Hub.Mts100.Schedule":{"scheduleUnitTime":30}}}}

All-Data:

"digest":{"hub":{"hubId":52658,"mode":0,"subdevice":[{"id":"000013CD","status":1,"onoff":1,"lastActiveTime":1549149687,"mts100":{"mode":3}},{"id":"0000132D","status":1,"onoff":1,"lastActiveTime":1549149848,"mts100":{"mode":1}}]}}}}

Event

Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":275,"comfort":240}]}

Appliance.Hub.Mts100.Temperature - data: {"temperature":[{"id":"0000132D","room":250,"currentSet":180,"economy":180}]}

Appliance.Hub.Mts100.Schedule - data: {"schedule":[{"id":"0000132D","mon":[[390,1],[1050,0]],"tue":[[390,1],[1050,0]],"wed":[[390,1],[1050,0]],"thu":[[390,1],[1050,0]],"fri":[[390,1],[1050,0]],"sat":[[450,1],[990,0]],"sun":[[390,1],[1050,0]]}]}

from iobroker.meross.

initial support in 1.2.0 on girhub ... more as soon as we have more logs

from iobroker.meross.

initial support in 1.2.0 on girhub ... more as soon as we have more logs

from iobroker.meross.