Name: Akram Ali
Type: User
Company: AKstudios
Bio: Architecture, software, engineering, embedded, IoT, graphic design, science, hacking and everything else.
Twitter: akstudios
Location: Chicago, IL
Blog: http://www.akstudios.com
Akram Ali's Projects
A 3V5 (3V3+extra headroom) output version of the Adafruit PowerBoost
This code automatically sets the gain of the ADS1115 16-bit ADC depending on the input voltage (between 0-5V).
ADS1115 Breakout board for 0-5V input and 3.3V I2C level
Battery-Operated Radiator Control
This is a breakout board for the CCS811 gas sensor
This is a library for the CCS811 digital TVOC/eCO2 Sensor by CCMOSS/AMS
This Python script will scrape chicagohilal.org and get today's date in Hijri.
Breakout for COZIR-LP sensor
A collection of libraries created, modified or tweaked by AK
Wireless air quality sensor based on RFM69
This repo contains scripts for Raspberry Pi based heat flux loggers based on FluxTeq Compaq DAQ and PHFS-01 heat flux sensors.
This is a code for a wireless CO2 node based on the K-30 CO2 sensor. This sensor is accurate enough to be used for reference in indoor CO2 measurements
This is a door status shield for the Moteino. It uses a reed switch to check the status of a door (open/close)
This is an air quality shield for Motenio that measures temperature, humidity, light intensity, PM2.5, CO2 and VOC concentrations.
DS3234 RTC Shield for Moteino.
RFM69/Moteino to UART gateway
Moteino USB-LP
A motion/activity data logger that stores time-stamped data on a microSD card whenever there is motion within 3-5m. Approximate battery life: 1-2 years depending on LiPo battery used.
This is a breakout for the 8 pin connector for PMS5003/7003 PM2.5 sensor. All necessary pins are broken out
Just a small board that fades 3 LEDs running on a coin-cell battery.
ADS1220 arduino library