aitesam961 Goto Github PK

I am Aitesam. I chose Electrical Engineering as a Profession of interest and I develop embedded solutions from hobbyist level to commercial products and sometimes, industrial equipment. With experience in embedded hardware design and firmware development, I am also interested in RISCV, Computer Architecture, FPGAs, Quantum Computing and Space technologies.

• Embedded Hardware Design
  • SMPSs & LDO PSUs
  • Interfacing MCUs
  • Interfaces like MIPI/CSI/DSI,I2C,SPI,UART
  • Mixed Signal PCB design
  • High-Speed PCB Design
• Firmware for IoT Devices
  • Custom Drivers for Sensors & Actuators
• Smart Control Systems
  • DIY PLCs
  • PID Controller Design
  • Close-Loop Feedback Integration in IOT Environement
• C++ and Micropython
• Mobile Application Design for IoT

My area of interest lies in Embedded hardware Design, Firmware development for innovative Technological solutions. Moreover, I enjoy working on Advanced Computer architecture, RISCV based SoC design, RTL design for FPGAs & ASIC.

Full Time: Implementation of RISCV Vector Extension for RV64 Core. Part Time: Study and Research on Modern Computing paradigms for AI and ML.

"Learning Never Stops" So I am Learning

• Primary Focus
  • FPGAs
  • RTL Design
  • IP Verification
  • RISC-V SoC on FPGA
  • Bare Minimum Compiler Design
• Secondry Objectives
  • Embedded NFC Antenna Design for PCB
  • Ultra High Speed interfaces like HDMI, PCIe, DDR4, 10GbE based Hardware design
  • SIMPLE Webpage Design in HTML To Host IoT Devices using IP
  • Deploy Trained AI Models on Low Power Embedded Systems
  • Transform & Implement Trained AI models onto Discrete Analog Hardware
  • Bare metal OS and drivers setup for custom hardware
  • Software drivers for PCIe driven accelerators on x86-64 platform.

. You can Expect these projects to get live on GitHub Soon

• Raspberry Pi CM4 Carrier Board with extensive set of Peripherals
• PCIe M.2 FPGA Development board
• A C++ GUI Application for #OpenADSP

And much more to come. Just someone catch the TIME for me.

Check out My GitHub Repositories for my Past Projects & Experience.

You can Check me out at:

• Twitter
• LinkedIn
• YouTube

Checkout: Routing Timelapse | KiCAD | Routing a 4-L LED Matrix badge board

Checkout: Routing Timelapse | EasyEDA Pro | Routing Audio Processing Device

[email protected]