devices active, devices inactive not updated after reconnect of line about iobroker.fb-checkpresence HOT 23 CLOSED

What is with the amount of active devices in the Fritzbox? Is the number of active device different to those in the adapter?

from iobroker.fb-checkpresence.

yes, thats than different, with my workaround it's fine now. ( I create a restart only of the adapter in the night after the internet re-connect of the box). Here from this night ( 24h logging, same as before ) the summary is higher, I've pressed some dash buttons.. :-)

from iobroker.fb-checkpresence.

I can not reproduce this in my network. In the numbers in the fritzbox you have also devices, that are not relevant for the adapter. All telephones or Smart Home Devices. You must subtract this.

from iobroker.fb-checkpresence.

I know this. Okay, I start to debug more and set the adapter in the debug mode in the evening and make more investigations.
Can be, that other issues have impact to this.

from iobroker.fb-checkpresence.

Hi, has you new informations about the issue?

from iobroker.fb-checkpresence.

Hi, sorry, I found nothing to clarify the issue, sometimes the number of devices are changing, sometimes not. After Re-Connection of the ISP in the night I let restart automatically the Adapter, and it looks, that this solves the problem.
But I don't know the reason, the adapter show no fault and there are no updates of the connected devices any more..
Same with FritzOS 7.21, and up with 7.24beta on two different 7590.
I can check the issue with a 7580 and 7560 in the next days, if I have time... so far..

from iobroker.fb-checkpresence.

i have same problem whit Fritbox 6490 whit Fritos 7.20 i dont now was happen but dont update presence of mobile device.

from iobroker.fb-checkpresence.

i rollback version 1.0.4 and work again

from iobroker.fb-checkpresence.

same Problem here, same config as above

from iobroker.fb-checkpresence.

@mikweb2017 @Dragon0501
I need more input for further investigations.

from iobroker.fb-checkpresence.

Which input? What can I do?

from iobroker.fb-checkpresence.

@afuerhoff
which information do you need?

from iobroker.fb-checkpresence.

@Dragon0501 @mikweb2017
Please switch the log level (instance page) to debug.
I need the log for the time point when the failure happens.

from iobroker.fb-checkpresence.

@Dragon0501
On the instances page you have to switch on the expert view and there you can switch the log level from info to debug.

from iobroker.fb-checkpresence.

I have the same problem. I musst restart the adapter daily.
I will try to give you the log, too.

from iobroker.fb-checkpresence.

@afuerhoff
as already written after rollback to 1.0.4 works again i should again change version and wait a few hours or days isn't there another possibility with older logs? i would like to avoid not receiving update at this time since i depend on other operations

from iobroker.fb-checkpresence.

is 1.1.1 already useable or should we check it with 1.1.0?

from iobroker.fb-checkpresence.

@Dragon0501 1.1.1 is in a test state. You can use it.

@mikweb2017 you can download an older log but it must be on log level debug. I think that this is the problem.

from iobroker.fb-checkpresence.

@mikweb2017, @Ilovegym66, @Dragon0501, @kaip2503
Hi! Can you test the version 1.1.2 on Github.

from iobroker.fb-checkpresence.

Leider ohne erfolg. ich bekomme es auch nur noch zum laufen, wenn ich die Geräte neu einlese. Ein einfacher Neustart des adapters bringt nichts.

from iobroker.fb-checkpresence.

@mikweb2017, @Ilovegym66, @Dragon0501, @kaip2503
I have updated the adapter on Github. Please install the bugfixed version for testing.

from iobroker.fb-checkpresence.

work for me until now i give feedback tomorrow

from iobroker.fb-checkpresence.

works fine now.

from iobroker.fb-checkpresence.