tcp.write_multiple_registers command is unable to write more than 3 registers, in modbus TCP about umodbus HOT 2 OPEN

Hello @Abolohit, thanks for your comment. I'm not convinced yet that the issues are caused by a bug in this package. Could you provide more info?

1. Are you using Modbus TCP or Modbus RTU? In case of the latter, noise on the serial line could cause the issues you describe.

2. Can you provide a some code that cause issues? And would it be possible to provide logs that show the faulted frames? A pcap file created with Wireshark would be great.

3. Can you verify the behavior with another modbus master? Does the slave receives faulted frames too?

from umodbus.

I am using Modbus TCP.

The slave recieves the faulted frames. I am actually sending a IP address to the slave by taking a ip address string and breaking it into 4 integers, then writing those 4 integers to holding registers on the slave.

If I use the write multiple registers and send the 4 integers, the last integer(4th) becomes a random number.

If I use write multiple registers and send only the first 3 integers and then send the 4th integer separately using write single register, only then I am able to recieve the complete IP Address accurately on my slave.

My goal is to send an IP Address to the slave using Modbus TCP, which then gets stored in the holding registers of the slave for future use.

Here is a part of my code.

 sock2 = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
 sock2.settimeout(1)

 try:
      sock2.connect((ip_addr.value, 502))

   
      override_ip = tcp.write_multiple_registers(slave_id=1, starting_address=30, values=[ip1, ip2, ip3, ip4])
  
  
      response = tcp.send_message(override_ip, sock2)
      sock2.close()

  except socket.timeout:
      app.error("Timeout", "Check validity of entered IP Address or network connection")

This was my initial attempt at sending the ip address, ip4 fails to be recieved at the slave accurately.

I had to use this work around:

 sock2 = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
 sock2.settimeout(1)

 try:
      sock2.connect((ip_addr.value, 502))

   
      override_ip = tcp.write_multiple_registers(slave_id=1, starting_address=30, values=[ip1, ip2, ip3])
 
   
      response = tcp.send_message(override_ip, sock2)
      sock2.close()

  except socket.timeout:
      app.error("Timeout", "Check validity of entered IP Address or network connection")


 sock3 = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
 sock3.settimeout(1)

 try:
      sock3.connect((ip_addr.value, 502))


      override_ip_last = tcp.write_single_register(slave_id=1, address=33, value=ip4)


      response = tcp.send_message(override_ip_last, sock3)
      sock3.close()

 except socket.timeout:
      app.error("Timeout", "Check validity of entered IP Address or network connection")

from umodbus.