Tty response timing out about mbusd HOT 3 CLOSED

Looks like your TCP master sends requests to the RTU device with Slave ID set to FF:

01 Mar 2021 11:03:30 conn[192.168.1.53]: request: [ff][03][03][00][00][01]

Make sure your RTU slave has the same Unit/Slave ID. If not, change its value either on master or slave device.

from mbusd.

Thank you for responding, I don't have the hardware at hand anymore unfortunately, so I can't verify that but it seems that it is the case. Thank you for help.

from mbusd.

Hello.
I have similar problem. Slave ID is 31. Program tries to connect but gives timeout error. mbus.conf have only changed setting to 8n2.

docker run -ti -v /dev/ttyRS485-1:/dev/serial --p rivileged -v /etc/mbusd.conf:/opt/mbusd.conf -p 1502:502 --name=mbusd quenorha/mbusd -v9

mbusd.txt

from mbusd.