Comments (12)
fredriklj
commented on July 18, 2024
1
Nice. It has been running smoothly now for about half an hour:
04 Jan 2019 19:07:06 conn_loop(): select() returns 1
04 Jan 2019 19:07:06 tty: error in read() (port closed)
04 Jan 2019 19:07:06 trying to re-open tty...
04 Jan 2019 19:07:06 tty re-opening...
04 Jan 2019 19:07:06 tty_reopen(): can't open tty device /dev/ttyPort0 (No such device)
04 Jan 2019 19:07:06 tty re-opening...
04 Jan 2019 19:07:06 tty_reopen(): can't open tty device /dev/ttyPort0 (No such file or directory)
04 Jan 2019 19:07:06 tty re-opening...
04 Jan 2019 19:07:06 tty_reopen(): can't open tty device /dev/ttyPort0 (No such file or directory)
04 Jan 2019 19:07:06 tty re-opening...
04 Jan 2019 19:07:06 tty: state now is TTY_PAUSE
04 Jan 2019 19:07:06 tty re-opened.
from mbusd.
fredriklj
commented on July 18, 2024
1
Currently I suspect the error to have been a bad USB cable which picked up electro-magnetic interference from the environment. After having replaced it the re-connection errors seem to have gone away!
from mbusd.
3cky
commented on July 18, 2024
1
That's great! Glad you sorted this out. Thank you for the participation, I'll close this issue, feel free to reopen it or create new one in case of further problems.
from mbusd.
3cky
commented on July 18, 2024
Hmm, interesting. Is mbusd the only master on the RS485 bus? Looks like mbusd is receiving some unexpected data from the bus while it's in idle state. Nevertheless, it shouldn't go into infinite loop in this case. I'll take a look into the code.
from mbusd.
fredriklj
commented on July 18, 2024
Yes, it is the only master. There are three slaves: two energy meters and one HVAC system. I'll try to watch the interface to see if there is something unexpected being received on it..
from mbusd.
3cky
commented on July 18, 2024
I did some fixes in serial port initialization code, please rebuild mbusd with the updated code and check is something changed or not.
from mbusd.
fredriklj
commented on July 18, 2024
I investigated a bit further, it seems my device (FT232R USB UART) is being reset now and then, for yet unknown reasons. Anyway, output from updated code below:
$ sudo ./mbusd -d -v 9 -p /dev/ttyPort0 -s 9600 -t
03 Jan 2019 21:15:42 mbusd-0.3.1 started...
03 Jan 2019 21:15:42 tty: state now is TTY_PAUSE
03 Jan 2019 21:15:42 conn_loop(): select(): max_sd = 4, t_out = 000000:100000
03 Jan 2019 21:15:42 conn_loop(): select() returns 0
03 Jan 2019 21:15:42 tty: state now is TTY_READY
03 Jan 2019 21:15:42 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn_open(): accepting connection from 127.0.0.1
03 Jan 2019 21:15:55 queue_new_elem(): length now is 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 5, t_out = 000060:000000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_FUNC
03 Jan 2019 21:15:55 conn[127.0.0.1]: read request fc 4
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_TAIL
03 Jan 2019 21:15:55 conn[127.0.0.1]: request: [03][04][00][0a][00][01]
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_TTY
03 Jan 2019 21:15:55 tty: state now is TTY_RQST
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 tty: written 8 bytes
03 Jan 2019 21:15:55 tty: request written (total 8 bytes)
03 Jan 2019 21:15:55 tty: state now is TTY_RESP
03 Jan 2019 21:15:55 tty: estimated 7 bytes, waiting 515624 usec
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000000:515624
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 tty: read 7 bytes
03 Jan 2019 21:15:55 tty: rx offset is 0
03 Jan 2019 21:15:55 tty: read 7 bytes of 7, offset 0
03 Jan 2019 21:15:55 tty: state now is TTY_PROC
03 Jan 2019 21:15:55 tty: response read (total 7 bytes, offset 0 bytes)
03 Jan 2019 21:15:55 tty: response is correct
03 Jan 2019 21:15:55 tty: response: [03][04][02][00][00][c0][f0]
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RESP
03 Jan 2019 21:15:55 tty: state now is TTY_PAUSE
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 5, t_out = 000000:100000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 5, t_out = 000000:099859
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_FUNC
03 Jan 2019 21:15:55 conn[127.0.0.1]: read request fc 4
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_TAIL
03 Jan 2019 21:15:55 conn[127.0.0.1]: request: [03][04][00][0c][00][01]
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_TTY
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000000:098814
03 Jan 2019 21:15:55 conn_loop(): select() returns 0
03 Jan 2019 21:15:55 tty: state now is TTY_RQST
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000059:000000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 tty: written 8 bytes
03 Jan 2019 21:15:55 tty: request written (total 8 bytes)
03 Jan 2019 21:15:55 tty: state now is TTY_RESP
03 Jan 2019 21:15:55 tty: estimated 7 bytes, waiting 515624 usec
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000000:515624
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 tty: read 7 bytes
03 Jan 2019 21:15:55 tty: rx offset is 0
03 Jan 2019 21:15:55 tty: read 7 bytes of 7, offset 0
03 Jan 2019 21:15:55 tty: state now is TTY_PROC
03 Jan 2019 21:15:55 tty: response read (total 7 bytes, offset 0 bytes)
03 Jan 2019 21:15:55 tty: response is correct
03 Jan 2019 21:15:55 tty: response: [03][04][02][00][00][c0][f0]
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RESP
03 Jan 2019 21:15:55 tty: state now is TTY_PAUSE
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 5, t_out = 000000:100000
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 5, t_out = 000000:099861
03 Jan 2019 21:15:55 conn_loop(): select() returns 1
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_FUNC
03 Jan 2019 21:15:55 conn[127.0.0.1]: read request fc 4
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_RQST_TAIL
03 Jan 2019 21:15:55 conn[127.0.0.1]: request: [03][04][00][14][00][01]
03 Jan 2019 21:15:55 conn[127.0.0.1]: state now is CONN_TTY
03 Jan 2019 21:15:55 conn_loop(): select(): max_sd = 4, t_out = 000000:099716
03 Jan 2019 21:15:56 conn_loop(): select() returns 0
03 Jan 2019 21:15:56 tty: state now is TTY_RQST
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 tty: written 8 bytes
03 Jan 2019 21:15:56 tty: request written (total 8 bytes)
03 Jan 2019 21:15:56 tty: state now is TTY_RESP
03 Jan 2019 21:15:56 tty: estimated 7 bytes, waiting 515624 usec
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000000:515624
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 tty: read 7 bytes
03 Jan 2019 21:15:56 tty: rx offset is 0
03 Jan 2019 21:15:56 tty: read 7 bytes of 7, offset 0
03 Jan 2019 21:15:56 tty: state now is TTY_PROC
03 Jan 2019 21:15:56 tty: response read (total 7 bytes, offset 0 bytes)
03 Jan 2019 21:15:56 tty: response is correct
03 Jan 2019 21:15:56 tty: response: [03][04][02][02][a4][c0][2b]
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_RESP
03 Jan 2019 21:15:56 tty: state now is TTY_PAUSE
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 5, t_out = 000000:100000
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 5, t_out = 000000:099863
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_RQST_FUNC
03 Jan 2019 21:15:56 conn[127.0.0.1]: read request fc 3
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_RQST_TAIL
03 Jan 2019 21:15:56 conn[127.0.0.1]: request: [03][03][00][2b][00][01]
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_TTY
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000000:099720
03 Jan 2019 21:15:56 conn_loop(): select() returns 0
03 Jan 2019 21:15:56 tty: state now is TTY_RQST
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 tty: written 8 bytes
03 Jan 2019 21:15:56 tty: request written (total 8 bytes)
03 Jan 2019 21:15:56 tty: state now is TTY_RESP
03 Jan 2019 21:15:56 tty: estimated 7 bytes, waiting 515624 usec
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000000:515624
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 tty: read 7 bytes
03 Jan 2019 21:15:56 tty: rx offset is 0
03 Jan 2019 21:15:56 tty: read 7 bytes of 7, offset 0
03 Jan 2019 21:15:56 tty: state now is TTY_PROC
03 Jan 2019 21:15:56 tty: response read (total 7 bytes, offset 0 bytes)
03 Jan 2019 21:15:56 tty: response is correct
03 Jan 2019 21:15:56 tty: response: [03][03][02][00][02][40][45]
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_RESP
03 Jan 2019 21:15:56 tty: state now is TTY_PAUSE
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 5, t_out = 000000:100000
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 5, t_out = 000000:099860
03 Jan 2019 21:15:56 conn_loop(): select() returns 1
03 Jan 2019 21:15:56 conn_close(): closing connection from 127.0.0.1
03 Jan 2019 21:15:56 queue_delete_elem(): length now is 0
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000000:076401
03 Jan 2019 21:15:56 conn_loop(): select() returns 0
03 Jan 2019 21:15:56 tty: state now is TTY_READY
03 Jan 2019 21:15:56 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:16:56 conn_loop(): select() returns 0
03 Jan 2019 21:16:56 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 conn_open(): accepting connection from 127.0.0.1
03 Jan 2019 21:17:01 queue_new_elem(): length now is 1
03 Jan 2019 21:17:01 conn[127.0.0.1]: state now is CONN_HEADER
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 5, t_out = 000060:000000
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 conn[127.0.0.1]: state now is CONN_RQST_FUNC
03 Jan 2019 21:17:01 conn[127.0.0.1]: read request fc 4
03 Jan 2019 21:17:01 conn[127.0.0.1]: state now is CONN_RQST_TAIL
03 Jan 2019 21:17:01 conn[127.0.0.1]: request: [01][04][01][56][00][02]
03 Jan 2019 21:17:01 conn[127.0.0.1]: state now is CONN_TTY
03 Jan 2019 21:17:01 tty: state now is TTY_RQST
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: written 8 bytes
03 Jan 2019 21:17:01 tty: request written (total 8 bytes)
03 Jan 2019 21:17:01 tty: state now is TTY_RESP
03 Jan 2019 21:17:01 tty: estimated 9 bytes, waiting 517708 usec
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:517708
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 3 bytes
03 Jan 2019 21:17:01 tty: rx offset is 0
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:501926
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:282062
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281938
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281817
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281696
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281574
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281453
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281332
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281213
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:281096
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280979
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280861
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280743
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280627
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280511
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280393
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280276
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280158
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:280041
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279923
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279807
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279691
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279573
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279455
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279337
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279220
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:279067
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278951
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278835
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278716
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278599
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278463
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278340
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:278050
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277917
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277781
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277644
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277521
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277397
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277274
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277152
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:277029
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:276721
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:276523
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:276403
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:276124
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:275968
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:275812
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:275677
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:275451
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
03 Jan 2019 21:17:01 conn_loop(): select(): max_sd = 4, t_out = 000000:275262
03 Jan 2019 21:17:01 conn_loop(): select() returns 1
03 Jan 2019 21:17:01 tty: read 0 bytes
03 Jan 2019 21:17:01 tty: read 3 bytes of 9, offset 0
from mbusd.
3cky
commented on July 18, 2024
Indeed looks like hardware problem. I've added serial port reinitialization to avoid a "tty: read 0 bytes" message endless loop, but anyway this situation isn't seem normal to me. Could you please to try run your setup with the updated code?
from mbusd.
fredriklj
commented on July 18, 2024
Yes, there is definitely a problem with the RS485 USB interface. After detecting the EOF it takes a while for it to re-appear. Tried the updated code, but mbusd still goes into spin:
$ sudo ./mbusd -d -v 9 -p /dev/ttyPort0 -s 9600 -t
04 Jan 2019 10:04:53 mbusd-0.3.1 started...
04 Jan 2019 10:04:53 tty: state now is TTY_PAUSE
04 Jan 2019 10:04:53 conn_loop(): select(): max_sd = 4, t_out = 000000:100000
04 Jan 2019 10:04:53 conn_loop(): select() returns 0
04 Jan 2019 10:04:53 tty: state now is TTY_READY
04 Jan 2019 10:04:53 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
04 Jan 2019 10:04:58 conn_loop(): select() returns 1
04 Jan 2019 10:04:58 tty: error in read() (port closed)
04 Jan 2019 10:04:58 closing tty on error...
04 Jan 2019 10:04:58 tty closed, re-opening...
04 Jan 2019 10:04:58 conn_init(): can't open tty device /dev/ttyPort0 (No such file or directory)
04 Jan 2019 10:04:58 tty: dropped 0 bytes
04 Jan 2019 10:04:58 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
04 Jan 2019 10:04:59 conn_loop(): select() returns 1
04 Jan 2019 10:04:59 conn_open(): accepting connection from 127.0.0.1
04 Jan 2019 10:04:59 queue_new_elem(): length now is 1
04 Jan 2019 10:04:59 conn[127.0.0.1]: state now is CONN_HEADER
04 Jan 2019 10:04:59 conn_loop(): select(): max_sd = 5, t_out = 000060:000000
04 Jan 2019 10:04:59 conn_loop(): select() returns 1
04 Jan 2019 10:04:59 conn[127.0.0.1]: state now is CONN_RQST_FUNC
04 Jan 2019 10:04:59 conn[127.0.0.1]: read request fc 4
04 Jan 2019 10:04:59 conn[127.0.0.1]: state now is CONN_RQST_TAIL
04 Jan 2019 10:04:59 conn[127.0.0.1]: request: [03][04][00][0a][00][01]
04 Jan 2019 10:04:59 conn[127.0.0.1]: state now is CONN_TTY
04 Jan 2019 10:04:59 tty: state now is TTY_RQST
04 Jan 2019 10:04:59 conn_loop(): select(): max_sd = 4, t_out = 000060:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_open(): accepting connection from 127.0.0.1
04 Jan 2019 10:05:02 queue_new_elem(): length now is 2
04 Jan 2019 10:05:02 conn[127.0.0.1]: state now is CONN_HEADER
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
04 Jan 2019 10:05:02 conn_loop(): select(): max_sd = 6, t_out = 000058:000000
04 Jan 2019 10:05:02 conn_loop(): select() returns 1
from mbusd.
3cky
commented on July 18, 2024
@fredriklj I've implemented a more robust serial port reconnect algorithm in b5e3c53, please test.
from mbusd.
3cky
commented on July 18, 2024
Great, did you find the cause of the adapter resets? Is it mbusd related, or it's also observed with other software?
from mbusd.
fredriklj
commented on July 18, 2024
I can observe EOF by just "sudo od -x < /dev/ttyPort0", so that part does not seem mbusd related. I will investigate further to see if it is the USB-RS485 misbehaving, or something at the bus.
from mbusd.
Related Issues (20)
- Error when building on Raspberry Pi HOT 2
- Docker build failing HOT 1
- Docker-compose.yaml file ? HOT 4
- segv on high frequent register fetch
- usr/bin/mbusd: line 1: syntax error: unexpected "(" when running docker
- help
- /dev/ttyUSB0 is starting like /dev/ttyS0 HOT 1
- Crash due to missing `logw()` argument HOT 3
- '/W' requires an argument HOT 1
- version 0.5.1. HOT 1
- Modbus RTU - 6 Digit Holding Register HOT 2
- Missing device is retried forever [and blocks anything else] HOT 6
- publish docker image to ghcr & auto-build in github actions
- Add support to modbus ascii
- /dev/ttyS0? HOT 5
- Help with usb to RS485 - SH-U11 HOT 1
- CRC Enable/Disable HOT 3
- mbusd can support modbus function 20 (0x14) Read File Record and function 21 (0x15) Write File Record ..
- Using IOCTL for GPIO control HOT 4
- Make use of Linux RS-485 Support HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from mbusd.