Build for WemosD1 mini. about sofarsolar_esp_rs485_logger HOT 8 CLOSED

No it won't work. The different image is needed for WemosD1

from sofarsolar_esp_rs485_logger.

I added wemos d1 mini image, but I didn't have time to check it.

RX->D1 , TX->D2.

Please check and let me know.

from sofarsolar_esp_rs485_logger.

Thanks. I will check and post the result.

from sofarsolar_esp_rs485_logger.

Firmware has been uploaded, initial config. went ok but i cannot re-enter configuration again . Device is connected to my network with assigned IP address . I was using "admin" as user, "AP password" as password.
Now i do not have acces to my inverter so i do not know is it working or not. Shall i receive some MQTT messages while logger is not connected to inverter?

from sofarsolar_esp_rs485_logger.

"AP password" is name of the field which you had to enter during first setup, it's not a password. There is no mqtt message on connecting to inverter. To check if rs485 works correctly you can look at converter there should be diod that's blinks regularly (interval is part of configuration) and if inverter is working you should see second led blinking just after first. First blinks is command to just inverter, second one is a response. You should also something about rs485 one the inverter display.

from sofarsolar_esp_rs485_logger.

what password for wemos in ap mode?

from sofarsolar_esp_rs485_logger.

check "sofarsolar2mqtt", I'll add to README

from sofarsolar_esp_rs485_logger.

Please reopen if something is missing.

from sofarsolar_esp_rs485_logger.