micsthepick / dsi2key Goto Github PK

can't press buttons, even after pressing the unlock combination

(might need to fix the GUI for this)

Hi, first of all, thanks for working on this project :)

Unfortunately, I am not able to make dsi2key work on Linux.

What I did:

• Run the server on PC: ./ds2key | grep -v "192.168.8.235:Received UDP::PACKET::NORMAL"
• Start "dsi2key.nds" on the console in "DSi mode" through TWLMENU++ from SD Card.
• Press physical buttons and touch screen on the DSi.

On the DSi

The screen shows these messages:

- Connecting via WFC data
UDP Port set o #9501.
UDP Port set o #9501.
Error #105 (socket): No buffer space available

and then it goes completely black.

On PC

The linux server shows this instead:

UDP Port set to #9501.
Connected on UDP port #9501

Nothing happens and nothing new is printed in the console when I press psychical buttons on the DSi. (<- Solved, I didn't have any mapping file)
When tapping the touchscreen, the server crashes with this error:

X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  132 (XTEST)
  Minor opcode of failed request:  2 (X_XTestFakeInput)
  Value in failed request:  0x0
  Serial number of failed request:  14
  Current serial number in output stream:  15

SetRay currently calls GetStringReference, which returns a std::string&

access violation is when assigning to this string a couple lines below

may have an influence over #1

despite setting up the PC and the DS correctly with the right config, the button presses, even if sent to the PC, are not virtually pressed.

PRs and general contributions welcome. All discussion of Vigem and alternatives should go here.
Currently using VJoy, but that is not so much a joy to install, and probably conflicts with other things when it is installed.

control a vjoy axis with the touchscreen position data

I haven't got the time to test right this second, but it should work OK. Will create a release for testing with.

Fix for linux

As previously stated in 0.0.2 - use calibration and raw touchscreen input to provide a more precise joystick/drawing area

Easylogging++ has some issues,
it does not like address sanitizer
either deprecate the usage or easyloggingpp, or perhaps update/manually fix issue