javitu / rt-n56u Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/rt-n56u
Automatically exported from code.google.com/p/rt-n56u
What steps will reproduce the problem?
Periodic connecting by ssh to the router.
What is the expected output? What do you see instead?
Same RSA-key for every session.
What version of the product are you using? On what operating system?
1.0.1.7f-p6 (rt-n56u)
Original issue reported on code.google.com by [email protected]
on 8 Jan 2012 at 2:13
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
# mount
rootfs on / type rootfs (rw)
none on /proc type proc (rw)
none on /var type ramfs (rw)
none on /etc type ramfs (rw)
none on /tmp type ramfs (rw)
none on /media type ramfs (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
mdev on /dev type ramfs (rw)
devpts on /dev/pts type devpts (rw)
none on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /media/AiDisk_a1 type ext3 (rw,noatime,data=ordered)
/dev/sda1 on /opt type ext3 (rw,noatime,data=ordered)
# ipkg install
-sh: ipkg: not found
# ipkg update
-sh: ipkg: not found
What version of the product are you using? On what operating system?
RT-N56U_1.0.1.7f-p7
Please provide any additional information below.
I've tried ten times now and it seems that optware does not start.
Original issue reported on code.google.com by [email protected]
on 13 Jan 2012 at 11:52
Мой английский не так крут, потому, пусть
простят меня другие ищущие...
Итак. С завидной периодичностью роутер
(rt-n56u) что-то качает...
Заметно это только по странице Мониторинг
трафика (/Main_TrafficMonitor_realtime.asp). Т.е. даже при
выключенном ВСЕМ железе которое к нему
подключается, он что-то откуда-то тянет на
скорости чуть больше 1 мегабайта в секунду.
Вопрос в том, Как найти Что? Откуда? и Зачем?
что-то скачивается.
Повторяется это несколько раз в сутки,
перезагрузка роутера не вызывает
прекращения этого процесса. Т.е. пока он САМ
не скачает, приблизительно, 780-800 мегабайт,
он не успокоится. В такие моменты, как
следует ожидать, интернет не радует
скоростью.
Как уже сказал, отключал все железки от
него, смотрел на этот график с разных
устройств, т.е. совпадение что именно они в
тот момент и качали это считаю не реальным.
Тем более, что потребление сети в этих
устройствах было куда более медленным.
Скажите, Куда копать? как замучить роутер
через ssh, что поставить в optware, какой лог вам
предоставить?
Я совсем не далек от линукса (это моя
основная ОС), но и не настолько близок, чтоб
самостоятельно найти источник проблемы.
Возможно ли, что это "некий сетевой флуд",
что мне льют с какой-то целью?
Проверяемые прошивки: Стоковая, местная p4 и
текущая установленная p6.
У меня есть реальный IP, но никакого сайта за
ним не стоит, IP используется только для
моих личных подключений извне — если это
важно.
Original issue reported on code.google.com by [email protected]
on 8 Jan 2012 at 2:42
Attachments:
What steps will reproduce the problem?
->
1. add remote log server "ip addres" & apply
2. reboot
3. System Log / General Log -> There is no log data
4. remote log server -> There is no log data
5. delete remote log server "ip addres" & apply
6. reboot
7. System Log / General Log -> There is log data
8. add remote log server "ip addres" & apply
9. System Log / General Log -> There is log data
10. remote log server -> Ther is log data
What is the expected output? What do you see instead?
-> If Log Server IP is set. After reboot, syslogd daemon does not start, and
eventually the log data isn't generated.
What version of the product are you using? On what operating system?
-> 1.0.1.7f-p4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Dec 2011 at 5:46
[deleted issue]
Hi, I am on P6 firmware and I have issues with pppoe connection. The router
connect normaly at startup and shows 2 ip adreses, if I click pause, remains
connected but not showing any ip adress just 0.0.0.0, the renew button is
greyed out. I have to reboot the router to change ip and show adresses.
I didn't try on previous firmwares
Original issue reported on code.google.com by [email protected]
on 23 Dec 2011 at 5:01
I'm not seeing anywhere in English what the point of this project is. what does
this firmware offer that the stock firmware does not?
Original issue reported on code.google.com by [email protected]
on 26 Dec 2011 at 9:28
What steps will reproduce the problem?
1. I have 2 HDD's connected to the USB ports on the router with some home
movies and some ripped movies which i want to watch on the LG TV
2. The streaming using DLNA used to work on the stock firmware,
RT-N56U_1.0.1.7f flawlessly, however since i installed RT-N56U_1.0.1.7f-p7 the
DLNA connection to the connected HDD's drops in 5-10 mins.
3. I am not sure which logs to attach or what other information needs to be
submitted to get this issue resolved.
What is the expected output? What do you see instead?
I expect that the DLNA connection to the shared disks shouldnt drop
What version of the product are you using? On what operating system?
This is being tested on LG LED TV.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 11 Jan 2012 at 7:15
What steps will reproduce the problem?
1. Configure router
2. Use router for some time (30 - 40 minutes)
3. Start clicking on links and notice that the internet is no longer working.
4. Wait 20-30 seconds and internet connection is reestablished.
5. Every few minutes go back to step 3.
What is the expected output? What do you see instead?
The expected output is a wan port that stays connected to the internet.
What version of the product are you using? On what operating system?
Both the official firmware and p4, p5, and p6 versions exhibit the same
behavior.
Please provide any additional information below.
Attached is a syslog file showing the disconnects.
Original issue reported on code.google.com by [email protected]
on 24 Dec 2011 at 10:54
What steps will reproduce the problem?
1. Enable LAN DHCP server
2. Enter a domain name with a '.' in it: example.com
3. Click Apply
What is the expected output? What do you see instead?
Expected: The change is applied and the DHCP server hands out a domain name to
the DHCP clients.
Observed: A help message that says only alphanumeric characters and the dash
are allowed is displayed to the right in a yellow box. A pop up widget says
'Invalid character!' and the change is not applied.
What version of the product are you using? On what operating system?
1.0.1.7f-p4
Please provide any additional information below.
This issue also exists in the stock firmware.
Original issue reported on code.google.com by [email protected]
on 14 Dec 2011 at 7:41
What steps will reproduce the problem?
1. try to wake up a PC behinde the rt-n56u AFTER a time of 5 min or so - it's
impossible if your system is in standby/ NIC is in standby
2. try a broadcast with the rt-n56u - it's impossible
What is the expected output? What do you see instead?
I expect a WOL, but nothing happens...
What version of the product are you using? On what operating system?
1.0.1.7f-p6
Please provide any additional information below.
If you try a wake up within your LAN, that's no problem because you did the
broadcast yourself.
If you configure the rt-n56u to make a broadcast (like port 9 in virtual server
settings to x.x.x.255) it dosen't work because the rt56u won't broadcast.
If you configure the direct IP like x.x.x.32 it will work from WAN as long as
the chipset dosen't save energy (its something between 1 to 5 minutes). Than it
won't work anymore.
Why? Because windows save energy in standby and hybernation mode on the LAN
port. That makes the rt-n56u to beleave this connetion is unused so itself cut
off this lane.
BUT! If you shut down your PC and your mortherboard settings are correct, than
you CAN wake it up via WAN.
WHY? Because now, windows won't save energy on the LAN port and the rt-n56u
won't cut off the LAN-port.
So WOL works from LAN as long as you do the broadcast yourself direct to the
network and virtual server ports are correct direct to the IP (no broadcast).
WOL from WAN only work if you shut down you PC. Thinks like another sub net
like x.x.x.192 to broadcast via x.x.x.63 doesn't fool the router.
WOL form LAN if PC standby = yes (as along as you do the broadcast)
WOL from WAN if PC standby = only for 1 to 5 minutes
WOL from WAN if PC shut down = yes
WOL via broadcast = noway!
WOL via broadcast tricks (like subnet x.x.x.192 or ethbroadcast like MAC
ffffffffffff) = noway!
Sorry for poor english. Greeting from germany!
Maybe you can add a function to disable energysaving of the router chipset to
enable WOL/ WOW.
THANKS!
Original issue reported on code.google.com by [email protected]
on 30 Dec 2011 at 2:34
vsftpd.conf will be overwritten on each restart.
Cause:
source/user/rc/services_ex.c : Line 1054
Adding a line for writting
"pasv_promiscuous=yes"
to vsftpd.conf will solve the issue.
Original issue reported on code.google.com by [email protected]
on 15 Dec 2011 at 4:43
+1
Original issue reported on code.google.com by [email protected]
on 13 Dec 2011 at 2:47
What steps will reproduce the problem?
1. with default settings minidlna won't start, on Miscellaneous setting if I
put /AiDisk_a1 is starting but not showing any file on my TV Samsung LE32CE550.
If I manually edit the minidlna.conf after a router reboot the file is
overwriten with original one but still minidlna not starting, the minidlna.conf
is ignored.
I use RT-N56U_1.0.1.7f-p3 firmware
Please help
Original issue reported on code.google.com by [email protected]
on 13 Dec 2011 at 3:30
What steps will reproduce the problem?
1. Reboot Router and look into Syslog
What is the expected output?
I would like to start a script S90Test.sh
in folder /opt/etc/init.d/ of USB stick on start of router
Seems this script is never called. Maybe the error message about
initrd is a hint why?
What version of the product are you using?
1.0.1.7f p7
Original issue reported on code.google.com by [email protected]
on 2 Jan 2012 at 12:46
--------------------Russian
Первый запуск канала IPTV через мобильное
устройство — заработало.
Попытки найти прописанные в конфиге мои
каналы YouTube не дали результата. Нашел в
веб-интерфейсе кнопку Перезагрузить фиды.
Каналы стали доступны. После этого все
пошло не так.
Проблема: при запуске канала IPTV или ролика
YouTube проигрывается не выбранный
ролик/канал, а ролик из следующей канала.
Т.е. IPTV теперь не доступно — проигрываются
ролики с YouTube или vimeo. IPTV обычным способом в
VLC в Ubuntu нормально работает.
Выбранный контент != что проигрывается.
Через веб-интерфейс (или nano) в плейлистах
правильные ссылки.
Проверено:
1) XBMC (Ubuntu 64)
2) "UPnPlay + VPlayer" в Андроид.
3) Chrome, через опцию Donwload в веб-интерфейсе.
Используются:
— RT-N56U_1.0.1.7f-p6 firmware (p5 update)
— xupnpd-1.0-rc4 (ставилось по инструкции в wiki через "ipkg install http://rt-n56u.googlecode.com/files/xupnpd-rt_n56u-1rc3.ipk" почему стоит другая версия — не знаю)
--------------------English
What steps will reproduce the problem?
1. Load IPTV playlist (format m3u)
2. Add same channels from Youtube
What is the expected output? What do you see instead?
The first launch of IPTV channels via your mobile device - successfully.
Attempts to find a prescription in my config YouTube channels have failed.
Found in the web interface button Reload feeds. Channels become available.
After that, the problems began.
Problem: when you start the channel IPTV or video YouTube plays not selected
movie / channel and video from the next channel. That is, IPTV is no longer
available - play videos from YouTube or vimeo. Normal play IPTV with VLC in
Ubuntu works fine.
Selected content != Something that is playing.
Through the web interface (or nano) playlists has true links.
checked:
1) XBMC (Ubuntu 64)
2) "UPnPlay + VPlayer" in Android.
3) Chrome, via the option Donwload the web interface.
What version of the product are you using? On what operating system?
— RT-N56U_1.0.1.7f-p6 firmware (p5 update)
— xupnpd-1.0-rc4 (installed as described in wiki "ipkg install
http://rt-n56u.googlecode.com/files/xupnpd-rt_n56u-1rc3.ipk" why versions is
different? — doesn't know)
Original issue reported on code.google.com by [email protected]
on 28 Dec 2011 at 9:13
Attachments:
Нелья ли в прошивку включить какой либо VPN
сервер ?
Original issue reported on code.google.com by [email protected]
on 28 Dec 2011 at 10:13
Installed xupnpd and worked flawlessly for some days but suddenly stoped and I
cannot start it anymore, I reinstalled more times and than started with
/opt/etc/init.d/S85xupnpd start command but not showing in webpage, if I try to
stop it gives me the next error: "sh: cannot kill pid 1016: No such process"
Original issue reported on code.google.com by [email protected]
on 20 Dec 2011 at 3:40
В карте сети, роутер не видит подключённого
жёсткого диска через хаб. хотя по самбе его
вижу и хожу на него нормально.
Можно что-нибудь исправить что был виден
жёсткий? Из-за этого не могу его
размонтировать, что бы отформатировать его
и разбить и прочее
Original issue reported on code.google.com by [email protected]
on 16 Dec 2011 at 3:53
Attachments:
[deleted issue]
What steps will reproduce the problem?
1. When I connect my hard drive to the USB port to view my movies over the
network to my Blu Ray player, it takes a long time until all movies are
synchronized after the first start or a reboot of the router.
Normally, it took about 1 hour to 1.5 hours with the firmware 8.1.1.4o and
1.0.1.4o and all folders were visible and ready to play on the Blu Ray Player.
After the firmware update to version 1.0.1.7f-pX (i've tried p5, p6 and p7), it
takes more than 24 hours and more.
Is it possible that the router is running with firmware 8.1.1.4o with the
status of IP sharing and with 1.0.1.7f-pX as a Router?
2.
3.
What is the expected output? What do you see instead?
Synchronisation usually within 1 hour - 2 hours. Now more than 24 hours.
What version of the product are you using? On what operating system?
Asus RT-N56U with Firmware 1.0.1.7f-p7
I am grateful for any help
Original issue reported on code.google.com by [email protected]
on 1 Jan 2012 at 9:49
Please make the source code for the latest version available.
Original issue reported on code.google.com by [email protected]
on 22 Dec 2011 at 1:19
What steps will reproduce the problem?
1. Upload own playlist - my.router:4044/playlists
2. Remove all predefined playlists except youtube_channel...
3. From Upnplay selected MX player cannot iniciate playback of any channel from
own or youtube playlist.
What is the expected output? What do you see instead?
It is expected requested video but I see error message only in MX player.
What version of the product are you using? On what operating system?
RT-N56U with p4, Samsung Galaxy S with Android 2.2.1.
Please provide any additional information below.
Without removing predefined playlists is all OK.
Original issue reported on code.google.com by [email protected]
on 21 Dec 2011 at 1:45
Можно оставить только русский и английский
языки, выкинув прочие языки, что бы можно
впихнуть в прошивку что-нибудь более
полезное.
Original issue reported on code.google.com by [email protected]
on 16 Dec 2011 at 2:48
What is the expected output?
Hi, I would like to use my RT-N56U as a (open)vpn client of vyprvpn. I can use
my Fedora machine to connect to this vpn provider, but I would like to have the
router do this job in order to have all internet traffic routed through this
service.
Is this possible?
What do you see instead?
I have setup optware and it works like a charm, but when I install openvpn I
create a server, not a client like I need. For example DD-WRT supports running
the router as a vpn client.
What version of the product are you using? On what operating system?
RT-N56U_1.0.1.7f-p7-mips32_2.zip
Thanks alot for information and hints on this, as I did not find any solution
for this yet.
Original issue reported on code.google.com by [email protected]
on 7 Jan 2012 at 2:50
[deleted issue]
хотелось бы что бы та таблица роутинга что
была заведена через консоль (у меня
довольно длинная портянка из маршрутов)
фиксировалась в роутере как если бы она
была вбита через веб интерфейс, и так же что
бы эти маршруты отображались в веб
интерфейсе с возможностью правки.
Original issue reported on code.google.com by [email protected]
on 8 Jan 2012 at 8:07
What is the expected output? What do you see instead?
I use asus ddns, but every about 10 seconds ddns is started
Ddns timer is there a way to increase?
What version of the product are you using? On what operating system?
1.0.1.7f-P4
Please provide any additional information below.
Dec 17 18:26:33 RT-N56U: [start ddns] watchdog
Dec 17 18:26:33 RT-N56U: start ddns
Dec 17 18:26:33 do ez-ipupdate: pid:0
Dec 17 18:26:33 ddns update: connected to ns1.asuscomm.com (124.219.0.97) on
port 80.
Dec 17 18:26:33 syslog: ddns_return_code (register,220) ddns_suggest_name ()
ddns_old_name ()
Dec 17 18:26:43 RT-N56U: [start ddns] watchdog
Dec 17 18:26:43 RT-N56U: start ddns
Dec 17 18:26:43 do ez-ipupdate: pid:0
Dec 17 18:26:43 ddns update: connected to ns1.asuscomm.com (124.219.0.97) on
port 80.
Dec 17 18:26:46 syslog: ddns_return_code (register,220) ddns_suggest_name ()
ddns_old_name ()
Dec 17 18:26:55 RT-N56U: [start ddns] watchdog
Dec 17 18:26:55 RT-N56U: start ddns
Dec 17 18:26:55 do ez-ipupdate: pid:0
Dec 17 18:26:55 ddns update: connected to ns1.asuscomm.com (124.219.0.97) on
port 80.
Dec 17 18:26:56 syslog: ddns_return_code (register,220) ddns_suggest_name ()
ddns_old_name ()
Dec 17 18:27:05 RT-N56U: [start ddns] watchdog
Dec 17 18:27:05 RT-N56U: start ddns
Dec 17 18:27:05 do ez-ipupdate: pid:0
Dec 17 18:27:05 ddns update: connected to ns1.asuscomm.com (124.219.0.97) on
port 80.
Dec 17 18:27:06 syslog: ddns_return_code (register,220) ddns_suggest_name ()
ddns_old_name ()
Dec 17 18:27:15 RT-N56U: [start ddns] watchdog
Dec 17 18:27:15 RT-N56U: start ddns
Dec 17 18:27:15 do ez-ipupdate: pid:0
Dec 17 18:27:15 ddns update: connected to ns1.asuscomm.com (124.219.0.97) on
port 80.
Dec 17 18:27:15 syslog: ddns_return_code (register,220) ddns_suggest_name ()
ddns_old_name ()
Original issue reported on code.google.com by [email protected]
on 17 Dec 2011 at 9:47
What steps will reproduce the problem?
1. Open EzQos or Bandwidth Management - User Specify Service in Advanced
settings
2. See there is no number next to Kbps on measured uplink speed
What is the expected output? What do you see instead?
A number that show my uplink speed (Even 0)
What version of the product are you using? On what operating system?
1.0.1.7f-p7
Original issue reported on code.google.com by [email protected]
on 12 Jan 2012 at 9:33
Attachments:
Прошивке очень не хватает post-firewall скрипта,
как это было в прошивках под старые асусы. Я
специально патчил себя 7.0.0.32 чтобы этого
добиться:
/source/user/rc.firewall_ex.c
else
{
system("insmod nf_conntrack_ftp");
system("insmod nf_nat_ftp");
}
//post-firewall script
eval("/opt/usr/bin/post-firewall.sh");
По уму конечно надо добавить в морду
настройку имени скрипта, а не зашивать
жестко в прошивку, как у меня.
Original issue reported on code.google.com by [email protected]
on 12 Dec 2011 at 3:54
PPPoE
IPTV stop working after 23-24h
internet continue work
1.0.1.4.f
RT-N56U_1.0.1.7f-p1
RT-N56U_1.0.1.7f-o2
change router do'nt help
dir300nru work stable
bug in firmware
в общем проблема такая IPTV по UDP подключение
PPPoE
Dir300nru проблем не было
ASUS Rt-n56u на прошивках на которых работает IPTV
как Multicast, а не только на порт для приставки
да и на порт тоже IPTV отключается через 23-24
часа
1.0.1.4.f
RT-N56U_1.0.1.7f-p1
RT-N56U_1.0.1.7f-o2
эти прошивки проверял
логи скину завтра спс.
Original issue reported on code.google.com by [email protected]
on 7 Dec 2011 at 12:41
How about some dual/multiwan capability?
Original issue reported on code.google.com by [email protected]
on 21 Dec 2011 at 3:17
Hi!
I'm using p6 version of your firmware and recently i'm having a problem/issue.
My router is adding on its own some port forwarding to my local computers. How
is that possible ?
Here is few lines from my log:
Dec 29 10:26:01 upnpd[940]: Failure in GateDeviceDeletePortMapping:
DeletePortMap: Proto:UDP Port:49394
Dec 29 10:26:03 upnpd[931]: Failure in GateDeviceDeletePortMapping:
DeletePortMap: Proto:TCP Port:49394
Dec 29 10:26:08 upnpd[931]: AddPortMap: Prot: UDP ExtPort: 49394 Int:
192.168.1.104.49394
Dec 29 10:26:10 upnpd[940]: AddPortMap: Prot: TCP ExtPort: 49394 Int:
192.168.1.104.49394
I can see these ports in PORT FORWARDING log and how can i remove them ??. I
tried using IPTABLES but couldn't do it.
Original issue reported on code.google.com by [email protected]
on 29 Dec 2011 at 11:17
What steps will reproduce the problem?
The router only allows up to 16 DHCP reservations to be made.
Please provide any additional information below.
Could support be added for more than 16 DHCP reservations?
Original issue reported on code.google.com by [email protected]
on 12 Jan 2012 at 2:28
Have just installed the latest custom firmware (p6). Router itself seems to be
working fine. However, cannot get firmware to work.
Symptoms: Running ipkg gives
# ipkg
-sh: ipkg: Input/output error
However, running ipkg.sh allows installing applications. E.g.:
# ipkg.sh install zip
Downloading
http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/bzip2_1.0.6-1_mipsel
.ipk ...
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
Done.
Unpacking bzip2...Done.
Configuring bzip2...update-alternatives: Linking //opt/bin/bzip2 to
/opt/bin/bzip2-bzip2
Done.
Downloading
http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/zip_3.0-1_mipsel.ipk
...
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
Done.
Unpacking zip...Done.
Configuring zip...Done.
But then:
# zip
-sh: zip: Input/output error
Note, the attached USB drive is formatted in ext3 (note a second drive NTFS
attached):
# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 19457 156288321 83 Linux
Disk /dev/sdb: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 77825 625129281 7 HPFS/NTFS
Any ideas/pointers? From the wiki it would seem this is unexpected. Thanks!
Original issue reported on code.google.com by [email protected]
on 25 Dec 2011 at 5:29
[deleted issue]
Hi There, firstly thanks for your amazing work!
I'm trying to add multiple paths to the minidlna path scan, however if I edit
/etc/minidlna.conf the paths (media_dir=) added are wiped on reboot and
replaced with
media_dir=/media
I'm aware you can add a path in the router config under USB App, misc. However
I'm failing to understand how to add multiple paths.
I'm trying to add locations from 2 attached 1TB USB drives.
Is there some sort of script I need to enable or something else I should be
editing in order to add multiple paths to the config file.
I'm trying to add something like:
media_dir=V, /media/AiDisk_a5
media_dir=/media/AiDisk_b1
Which is wiped on reboot.
Thanks in advance for any help!
Original issue reported on code.google.com by [email protected]
on 8 Jan 2012 at 12:43
нет ли возможности пофиксить поддержку 4g
модемов?
не смотря на то, что в 1.0.1.7c добавили их
поддержку:
Fixed bug:
1. add 3G/4G dongle support
даже на 1.0.1.7f не удалось завести Samsung SWC-U200.
Original issue reported on code.google.com by [email protected]
on 2 Dec 2011 at 3:07
Although I do not currently use this firmware, I would very much like to, but
there is one issue in particular that would make this firmware a must-have.
Is it possible that a second, or even third or fourth, print queue could be
added so that the RT-N56U can support more than one printer at a time? The
router already allows the use of a USB hub to go beyond the 2 USB ports
provided, but the current limitation of one printer is very restrictive, which
is why I am exploring the possibility of using a custom firmware such as this
one.
Original issue reported on code.google.com by [email protected]
on 14 Dec 2011 at 2:45
А не реализовать ли транскондинг для
медиаплеера?
Многие сетевые медиаплееры не так
универсальны в плане форматов (не понимают
всяческие флаки, алаки, мовы, mkv и т д и т п.
Не реализовать ли транскодинг на лету для
подобных нестандартных форматов? (можно
сделать систему профилей с выбором
используемого медиаплеера и транскодер бы
декодил нестандартные форматы в форматы и
контейнеры понимаемые медиаплеером) - по
примеру Home Media Server, TVERSity итд..
Надеюсь мое пожелание не очень наглое:)
Original issue reported on code.google.com by [email protected]
on 2 Jan 2012 at 3:40
Новый исходник 1.0.1.8b
на офф сайте
Original issue reported on code.google.com by [email protected]
on 12 Jan 2012 at 9:34
Прошивка 1.0.1.7f-p7
Не видно подключённого жёсткого диска к USB
HUB в веб морде.
# mount
rootfs on / type rootfs (rw)
none on /proc type proc (rw)
none on /var type ramfs (rw)
none on /etc type ramfs (rw)
none on /tmp type ramfs (rw)
none on /media type ramfs (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
mdev on /dev type ramfs (rw)
devpts on /dev/pts type devpts (rw)
none on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /media/AiDisk_a1 type ext3 (rw,noatime,data=ordered)
/dev/sda1 on /opt type ext3 (rw,noatime,data=ordered)
#
Jan 3 12:50:30 kernel: usb 1-1: USB disconnect, address 2
Jan 3 12:50:30 RT-N56U: asus_sd starts
Jan 3 12:50:30 RT-N56U: asus_sd starts
Jan 3 12:50:30 RT-N56U: asus_usb_interface starts
Jan 3 12:52:08 kernel: usb 1-1: new high speed USB device using rt3xxx-ehci
and address 3
Jan 3 12:52:08 kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 3 12:52:08 kernel: hub 1-1:1.0: USB hub found
Jan 3 12:52:08 kernel: hub 1-1:1.0: 7 ports detected
Jan 3 12:52:08 RT-N56U: asus_usb_interface starts
Jan 3 12:52:26 kernel: usb 1-1.7: new high speed USB device using rt3xxx-ehci
and address 4
Jan 3 12:52:26 kernel: usb 1-1.7: configuration #1 chosen from 1 choice
Jan 3 12:52:26 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 3 12:52:26 kernel: usb-storage: device found at 4
Jan 3 12:52:26 kernel: usb-storage: waiting for device to settle before
scanning
Jan 3 12:52:31 kernel: usb-storage: device scan complete
Jan 3 12:52:31 kernel: scsi 1:0:0:0: Direct-Access FUJITSU MHZ2250BH G2
PQ: 0 ANSI: 2 CCS
Jan 3 12:52:31 kernel: SCSI device sda: 488397168 512-byte hdwr sectors
(250059 MB)
Jan 3 12:52:31 kernel: sda: Write Protect is off
Jan 3 12:52:31 kernel: sda: Mode Sense: 34 00 00 00
Jan 3 12:52:31 kernel: sda: assuming drive cache: write through
Jan 3 12:52:31 kernel: SCSI device sda: 488397168 512-byte hdwr sectors
(250059 MB)
Jan 3 12:52:31 kernel: sda: Write Protect is off
Jan 3 12:52:31 kernel: sda: Mode Sense: 34 00 00 00
Jan 3 12:52:31 kernel: sda: assuming drive cache: write through
Jan 3 12:52:31 kernel: sda:
Jan 3 12:52:31 kernel: sda1
Jan 3 12:52:31 RT-N56U: asus_sd starts
Jan 3 12:52:31 kernel: sd 1:0:0:0: Attached scsi disk sda
Jan 3 12:52:31 RT-N56U: asus_sd starts
Jan 3 12:52:31 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jan 3 12:52:31 RT-N56U: asus_sg starts
Jan 3 12:52:33 kernel: kjournald starting. Commit interval 5 seconds
Jan 3 12:52:33 kernel: EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
Jan 3 12:52:33 kernel: EXT3 FS on sda1, internal journal
Jan 3 12:52:33 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 3 12:52:33 opt-mount.sh: started [/dev/sda1 /media/AiDisk_a1]
Jan 3 12:52:33 RT-N56U: usbled starts
Jan 3 12:52:33 USB storage: plugged in
Jan 3 12:52:34 kernel: Adding 262136k swap on /opt/.swap. Priority:-2
extents:67 across:266556k
Jan 3 12:52:34 opt-mount.sh: Activate swap file /opt/.swap SUCCESS!
Jan 3 12:52:34 transmission-daemon: Starting transmission-daemon...
Jan 3 12:52:34 Media Server DLNA: daemon is stoped
Jan 3 12:52:35 Media Server: daemon is started
Jan 3 12:52:35 FTP Server: daemon is stoped
Jan 3 12:52:35 FTP server: daemon is started
Jan 3 12:52:35 Samba Server: smb daemon is stoped
Jan 3 12:52:35 syslog: Password for 'admin' changed
Jan 3 12:52:35 Samba Server: daemon is started
Jan 3 12:52:35 iTunes: daemon is stoped
Jan 3 12:52:35 iTunes Server: daemon is started
Jan 3 12:52:36 mt-daapd[1550]: Starting signal handler
Jan 3 12:52:36 mt-daapd[1550]: Loading playlists
Jan 3 12:52:36 mt-daapd[1550]: Initializing database
Jan 3 12:52:36 mt-daapd[1550]: Starting mp3 scan
Jan 3 12:52:39 mt-daapd[1550]: Starting web server from
/etc_ro/web/admin-root on port 3689
Jan 3 12:52:39 mt-daapd[1550]: Scanned 0 songs in 4 seconds
Jan 3 12:53:23 dropbear[1571]: Child connection from 192.168.1.2:58411
Jan 3 12:53:32 dropbear[1571]: password auth succeeded for 'admin' from
192.168.1.2:58411
Original issue reported on code.google.com by [email protected]
on 3 Jan 2012 at 8:58
Attachments:
I take this opportunity to congratulate all Happy New Year! I wish you health,
happiness, good luck. Good luck in the new year!
Пользуясь случаем поздравляю всех С
наступившим Новым Годом! Желаю Вам
здоровья, счастья, удачи. Успехов в новом
году!
Original issue reported on code.google.com by [email protected]
on 31 Dec 2011 at 10:26
[deleted issue]
What is the expected output? What do you see instead?
1 The first problem is as follows.
"nvram set wl_country_ code" with the command to change to US and KR. "Nvram commit" to the next.
Before rebooting the router would have changed the KR, but look after rebooting again, appears to be US.
2. The second problem is as follows.
"/sbin/ setCountryCode" ? What has changed is using, and how might that change the country_code the KR.
Anyway, I was changed by the KR.
List of WLAN channel is http://en.wikipedia.org/wiki/List_of_WLAN_channels
1) KR: 2.4GHz Channel bands are as follows: 1-13
5GHz Channel are as follows: 34,36,38,40,42,44,46,48,52,56,60,64,100,104,108,112,116,120,124,128,149,153,157,161,165
2) However, the boot log it N56U
2.4GHz the kernel: ch 1 ~ 11 show only, 12 and 13 does not come out.
kernel: Channel looks to the 1-13.
5GHz the kernel: Channel 149,153,157,161 visible.
3) In conclusion,from 2.4Ghz to manually set up 12 or 13, you can not find any
wireless devices N56U AP.
From 1 to 11 should only have to set manually, you can use the AP.
I have a system that did not support 5GHz, do not test.
What version of the product are you using? On what operating system?
1.0.1.7f-p4
Please provide any additional information below.
*** 2.4GHz & 5GHz boot log data (country code : KR)****
Jan 1 00:00:01 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jan 1 00:00:02 kernel: Key1Str is Invalid key length(0) or Type(0)
Jan 1 00:00:02 kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:00:02 kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:00:02 kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:00:02 kernel: 1. Phy Mode = 8
Jan 1 00:00:02 kernel: 2. Phy Mode = 8
Jan 1 00:00:02 kernel: 3. Phy Mode = 8
Jan 1 00:00:02 kernel: RTMPSetPhyMode: channel is out of range, use first
channel=0
Jan 1 00:00:02 kernel: MCS Set = ff ff ff 00 01
Jan 1 00:00:02 kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:02 kernel: =====================================================
Jan 1 00:00:02 kernel: Channel 149 : Dirty = 0, False CCA = 0, Busy Time = 0,
Skip Channel = FALSE
Jan 1 00:00:02 kernel: Channel 153 : Dirty = 0, False CCA = 0, Busy Time = 0,
Skip Channel = FALSE
Jan 1 00:00:02 kernel: Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 0,
Skip Channel = FALSE
Jan 1 00:00:02 kernel: Channel 161 : Dirty = 0, False CCA = 0, Busy Time = 0,
Skip Channel = FALSE
Jan 1 00:00:02 kernel: =====================================================
Jan 1 00:00:02 kernel: Rule 1 CCA value : Min Dirtiness (Include extension
channel) ==> Select Channel 149
Jan 1 00:00:02 kernel: Min Dirty = 4294967295
Jan 1 00:00:02 kernel: ExChannel = 0 , 0
Jan 1 00:00:02 kernel: BW = 40
Jan 1 00:00:02 kernel: Main bssid = bc:ae:c5:eb:9e:c8
Jan 1 00:00:02 kernel: <==== rt28xx_init, Status=0
Jan 1 00:00:02 kernel: 0x1300 = 00064380
Jan 1 00:00:02 kernel: RX DESC a08ce000 size = 2048
Jan 1 00:00:02 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jan 1 00:00:03 kernel: Key1Str is Invalid key length(0) or Type(0)
Jan 1 00:00:03 kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:00:03 kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:00:03 kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:00:03 kernel: 1. Phy Mode = 9
Jan 1 00:00:03 kernel: 2. Phy Mode = 9
Jan 1 00:00:03 kernel: 3. Phy Mode = 9
Jan 1 00:00:03 kernel: RTMPSetPhyMode: channel is out of range, use first
channel=0
Jan 1 00:00:03 kernel: MCS Set = ff ff 00 00 01
Jan 1 00:00:03 kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:c8:f6:0a
Jan 1 00:00:06 kernel: ch1 bssid=00:08:9f:cb:a3:40
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:c8:f6:09
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:b6:91:22
Jan 1 00:00:06 kernel: ch1 bssid=00:01:36:29:20:ac
Jan 1 00:00:06 kernel: ch1 bssid=00:1d:93:2f:dd:3c
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:b6:91:21
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:8e:ea:21
Jan 1 00:00:06 kernel: ch1 bssid=00:40:5a:c8:f6:08
Jan 1 00:00:06 kernel: ch1 bssid=00:01:36:29:20:ab
Jan 1 00:00:06 kernel: ch2 bssid=00:40:5a:d9:77:b9
Jan 1 00:00:06 kernel: ch3 bssid=00:40:5a:b1:79:e9
Jan 1 00:00:06 kernel: ch3 bssid=00:40:5a:b1:79:e8
Jan 1 00:00:06 kernel: ch3 bssid=00:18:e7:ef:10:fc
Jan 1 00:00:06 kernel: ch3 bssid=00:40:5a:b1:79:ea
Jan 1 00:00:06 kernel: ch3 bssid=00:40:5a:a4:f5:80
Jan 1 00:00:06 kernel: ch4 bssid=00:40:5a:cb:e2:88
Jan 1 00:00:06 kernel: ch4 bssid=00:40:5a:cb:e2
Jan 1 00:00:06 8a
Jan 1 00:00:06 kernel: ch4 bssid=00:40:5a:cb:e2:89
Jan 1 00:00:06 kernel: ch5 bssid=00:d0:cb:c5:ae:20
Jan 1 00:00:06 kernel: ch5 bssid=06:0e:dc:1e:75:86
Jan 1 00:00:06 kernel: ch5 bssid=0a:0e:dc:1e:75:86
Jan 1 00:00:06 kernel: ch5 bssid=00:d0:cb:c5:ae:23
Jan 1 00:00:06 kernel: ch6 bssid=00:01:36:2b:06:62
Jan 1 00:00:06 kernel: ch6 bssid=00:01:36:2b:06:61
Jan 1 00:00:06 kernel: ch7 bssid=00:27:19:41:19:ce
Jan 1 00:00:06 kernel: ch7 bssid=00:08:9f:d3:65:a4
Jan 1 00:00:06 kernel: ch9 bssid=00:27:1c:02:ab:37
Jan 1 00:00:06 kernel: ch9 bssid=02:27:1c:02:ab:37
Jan 1 00:00:06 kernel: ch9 bssid=00:1f:96:17:d7:4c
Jan 1 00:00:06 kernel: ch9 bssid=00:1f:96:17:d7:4d
Jan 1 00:00:06 kernel: ch11 bssid=00:0e:e8:90:bd:08
Jan 1 00:00:06 kernel: ch11 bssid=00:26:66:14:81:ac
Jan 1 00:00:06 kernel: ch11 bssid=00:0e:e8:91:7e:a0
Jan 1 00:00:06 kernel: ch11 bssid=00:0e:e8:91:0b:44
Jan 1 00:00:06 kernel: ch11 bssid=00:01:
Jan 1 00:00:06 6:a3:52:ee
Jan 1 00:00:06 kernel: ch11 bssid=00:1d:7e:2b:e0:b1
Jan 1 00:00:06 kernel: ch11 bssid=00:01:36:3e:ee:46
Jan 1 00:00:06 kernel: ch11 bssid=00:08:9f:67:04:1c
Jan 1 00:00:06 kernel: ch11 bssid=00:24:a5:34:2e:0d
Jan 1 00:00:06 kernel: =====================================================
Jan 1 00:00:06 kernel: Channel 1 : Dirty = 1024, False CCA = 100, Busy Time =
12587, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 2 : Dirty = 770, False CCA = 676, Busy Time =
30715, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 3 : Dirty = 958, False CCA = 273, Busy Time =
17672, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 4 : Dirty = 870, False CCA = 203, Busy Time =
13322, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 5 : Dirty = 940, False CCA = 120, Busy Time =
11619, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 6 : Dirty = 652, False CCA = 59, Busy Time =
7191, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 7
Jan 1 00:00:06 Dirty = 780, False CCA = 59, Busy Time = 6477, Skip Channel =
FALSE
Jan 1 00:00:06 kernel: Channel 8 : Dirty = 620, False CCA = 8, Busy Time =
8615, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 9 : Dirty = 716, False CCA = 188, Busy Time =
7262, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 10 : Dirty = 504, False CCA = 194, Busy Time =
14846, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 11 : Dirty = 782, False CCA = 214, Busy Time =
15599, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 12 : Dirty = 384, False CCA = 249, Busy Time =
15559, Skip Channel = FALSE
Jan 1 00:00:06 kernel: Channel 13 : Dirty = 332, False CCA = 3, Busy Time =
416, Skip Channel = FALSE
Jan 1 00:00:06 kernel: =====================================================
Jan 1 00:00:06 kernel: Rule 1 CCA value : Min Dirtiness (Include extension
channel) ==> Select Channel 13
Jan 1 00:00:06 kernel: Min Dirty = 4294967295
Jan 1 00:00:06 kernel: ExChannel = 0 , 0
Jan 1 00:00:06 De
Jan 1 00:00:06 31 15:00:06 kernel: BW = 40
Jan 1 00:00:06 kernel: Main bssid = bc:ae:c5:eb:9e:c7
Jan 1 00:00:06 kernel: <==== rt28xx_init, Status=0
Original issue reported on code.google.com by [email protected]
on 15 Dec 2011 at 6:25
What steps will reproduce the problem?
1. Clicking on button
2.
3.
What is the expected output? What do you see instead?
Nothing occurs
What version of the product are you using? On what operating system?
Does not work on p4 or p5
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 20 Dec 2011 at 11:39
Клиенты (NAS, принтер) использующие сервис
Apple - bonjour отваливаются. В частности принтер
HP ENVY 100 при подключении к N56U в течение 2
минут после подключения можно найти с Iphone
(airprint) и с бука, но с пустя 3-5 мин это сделать
невозможно. Ищется только по ip с бука,
сетевое хранилище аналогично, но если с
сетевым хранилищем так жить еще можно
(приписал ip и все), то функцианальность
принтера урезается ибо airprint работает
только через bonjour.
Original issue reported on code.google.com by [email protected]
on 4 Dec 2011 at 4:11
I installed successfully transmission and it's working great, I acces it from
192.168.1.1:9091 but I don't have acces from wan, I oppened port 9091, 51413
(default), I changed the port and oppened another one in port forwarding but
without luck, tryed with Transmission Remote GUI but still nothing.
Maybe I have to specify another ip adress than 192.168.1.1 in port forwarding?
or maybe web gui access is just for ddwrt firmware?
There is somebody who managed to access it from wan?
Original issue reported on code.google.com by [email protected]
on 17 Dec 2011 at 11:27
What steps will reproduce the problem?
1. Try to download p7 in the "updates" section.
2.
3.
What is the expected output? What do you see instead?
Expected is a working download of version p7. Instead u get a broken download
link and google error page thats say: "The requested URL
/p/rt-n56u/downloads/detail?name=RT-N56U_1.0.1.7f-p7-mips32.zip was not found
on this server." Error 404.
What version of the product are you using? On what operating system?
Win 7 Ultimate x64 SP1, Firefox 10b2
Please provide any additional information below.
Please fix this asap.
Original issue reported on code.google.com by [email protected]
on 30 Dec 2011 at 12:34
[deleted issue]
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.