caseda / com.tkbhome Goto Github PK

Device => http://www.tkbhome.com/?cn-p-d-277.html
Alliance => http://products.z-wavealliance.org/products/1423
Manual => http://www.mondoplast.ro/download/6415/TZ-68.pdf

Please, add 2 relay TKB TZ74.

Hi,
the TZ36D is not recognized in version 2.0.5.
It connects as a generic z-wave device only.
Any idea what is wrong?
Thanks

The parameters of this device are as following:
Key | Value
zw_node_id | "28"
zw_manufacturer_id | "280"
zw_product_type_id | "785"
zw_product_id | "514"
zw_secure | "⨯"
zw_battery | "⨯"
zw_device_class_basic | "BASIC_TYPE_ROUTING_SLAVE"
zw_device_class_generic | "GENERIC_TYPE_SWITCH_BINARY"
zw_device_class_specific | "SPECIFIC_TYPE_POWER_SWITCH_BINARY"
zw_firmware_id | "4866"
zw_wakeup_interval | 0
zw_wakeup_enabled | false
zw_group_1 | ""
zw_group_2 | ""
zw_group_3 | ""
zw_group_4 | ""
zw_configuration_value | ""

Hi, I would like to ask you to add this thermostat:
https://obchod.homesystem.sk/elektricke-podlahove-kurenie/tkbhome-termostat-dotykovy/

I am more than happy to provide you with one for your tests... Please contact me at [email protected] Thanks

Please let me know how I can debug this problem

Hi.
Since the last update, 2.0.3, the only options available in the flow cards are:
Turned on
Turned off
Dim level changed

If I install version 2.0.1 (have a copy of that on my pc) I also get:
Right switched on
Right switched off
Right switched 2x on
Right switched 2x off

Br
Jonas

"Turned on" card doesn't trigger if you manually click the top left button of the switch. Only triggers if you turn on the switch (ligth) using the web interface or mobile app.

T56D detect as T36/T56 and flow not work.
work only "right 2x on/off" and then it works when you press it once

I am unable to add TZ68E. Have tried adding as TZ69E and TZ68 without luck. Please add support. Iam am using Homey 2.0.4

Good day,

please add support for TZ88 wall plug

http://products.z-wavealliance.org/products/1324
TKB TZ88 manual-20150527 (1) (1).pdf
manufacture id 280
product type id 1
product id 1

With kind regards,

René Ardley

Just bought a tbk TZ67-G wall plug dimmer as a replacement for a broken everspring dimmer.
When pairing, Homey said it only can paired as a generic device???
Paired as a generic device it's not dimmable

Sorry to bother again ....
I have one 4-1 sensor (TSM02) and the motion alarm is always on.
Already tried to Chance the Settings, exclude and include again.
But once the Motion Alarm is triggered is stays on for ever.

Any Idea on this?

After updating Homey firmware to V2.x.x the app no longer seems to be working. No device can be controlled nor is the status read from any.

Can you please fix this by updating the app to be compatible to firmware V2.xx?
Thank you!
Den

Hi.
I found an issue in the code for driver TZ35.
The flowcards for button 2 is not working and thats because a new "section" in app.json needs to be added for TZ35D_... and also the driver.js needs to be changed to match the flow.
Now it is configured against TZ65D_...
I have tried to do the changes and they work fine but it would be nice to get it fixed in the official release.

TZ10.36 Plus Z-Wave Floor Heating Thermostat
http://www.tkbhome.com/Z-Wave-Floor-Heating-Thermostat_012_89.html

Hi,

I have some TZ66D devices. Button one switches the lights, button two is controlling the blinds.
Now from time to time, manly in the evening, button one also controlls the blind. Meaning when e.g. switch off the light the blind starts to move. The flow I have set up is Ok (as it is quite simple).
Any idea why?

Regards,
Oliver

Hi,

Is there any chance that the TZ75 (Rollershutter Controller) will be added?

Regards,
Bert

good day.

TZ65 productTypeId not correct at app.json line 132
this has to be:
productTypeId 258
productId 4128

Hi,

I have a couple of TKB TZ69 Smart Energy Wallplug’s, Homey see’s them fine using your driver.

However I previously used these with home assistant and they reported back Voltage, this is missing on Homey. I would very much like to graph voltage as I think I’m getting spikes that i'd like to investigate.

Is it possible to add the voltage measurements in the driver?

Thanks

Same for Right switch [hold bottom] card. I assume this card would fire if you would press the right switch (also tried holding it for multiple seconds but didn't work either)

Hi

Please add support for the And card for the Wallplugs.
Now i cannot create a flow like > flow has started > And power usage is above 10 watt > then...

I have recently seen an issue with my TKB Plug
I get the error in the title when trying to switch via Homey

I can remove and re-pair it successfully, it will work for a short period, but every time same issue occurs.

Per thread here: https://forum.athom.com/discussion/comment/71038/#Comment_71038

Thanks

Beste Michel,

Ik heb de schakelaar TZ04 van TBKHOME gekocht en de bijbehorende app geïnstalleerd op Homey. Echter de bijbehorende switch is niet aanwezig. Hij installeert hem alleen als basis z-wave switch maar dan is hij nagenoeg onbruikbaar. Kunnen jullie s.v.p. de juiste switch toevoegen?
Alvast bedankt.

https://products.z-wavealliance.org/products/823

Met vriendelijke groeten, Fred Pols

I get No_Mobile on the 2 pcs of this that I have, try to enable/disable, uninstall and instal again, but no luck

Good day Caseda

thanks for rewrite to SDKv2
app since update yesterday keeps crashing

Regards
René

please add setOnDim capabilityoption and add a set brightness card. Similar to the fibaro app:
https://github.com/athombv/com.fibaro/pull/106/files

When selecting: "switch up = on, switch down = off" it does exactly the opposite.

Reference issue https://github.com/athombv/homey/issues/1222

Probably Something changed in reporting group 2 (& 3?)

Hi

It would be great to have support for the new Wave Plus versions like TZ57 Plus and TZ56s Plus

HW switch updates has stopped working, FW update?

Let me know what to test etc..

Hi. I just installed TZ75 only to find it is not supported in homey app. 😟. When will this be in the app. Wish i new before i bought it 😦

I get this error when trying to install the app on homey
running (beta) 2.0.0rc3

any suggestions?
I've reset the zwave network to factory

Hi, may I ask why v2.02 is not in Homey APPs, because I found that v2.02 already supports TZ74, but V2.01 in Homey APPs does not support this?

Not from a country that speaks English, there may be spelling mistakes, please forgive, thanks.

Originally posted by @sh1536 in #44 (comment)

tz88 configuration page: auto off timer to be off =0 but minimum number =1 to accepted to save

Type 3
Device 8
manufacturer 65535

Hi Marco,

After the latest update of the app, my wall dimmers can not be controlled by Homey anymore. The plugin modules appear to work fine. In Homey V2 (fully updated), all tkb home device tiles display a yellow dot in the upper right corner.
I've already restarted the app, but to no avail. Can you please fix the issue?

Thanks!
DenW

Bought The TKB TZ69E Wall Plug Switch/Meter from Vesternet http://www.vesternet.com/z-wave-tkb-tz69e-wall-plug-switch-meter-gen5-uk and realized it is not supported.

Here are the details:

Manufacturer ID: 280
Product Type ID: 785
Product ID: 259

Hi

The app keeps crashing on motion and contact. The log is:

MaxListenersExceeded-Warning: Possible EventEmitter memory leak detected: 11 __appInit listeners added. Use emitter.setMaxListeners() to increase limit
[Err] [ManagerDrivers] [TSP01] [0] do not use getOnStart for battery devices, use getOnOnline instead
[node:8870] UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 1): Error: Invalid card id
[node:8870] [DEP0018] DepreciationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proces with a non-zero exit code
/drivers/TSP01/device.js:37

Hi Caseda,

I have 4 TKB Home TZ78 modules. These are simular to the TZ74 modules, but single channel.
I have made a JSON file for this module based on one of your other drivers. But now i'm stuck!
How can I help You to add this to your wonderful piece of work?

Thanks in advance for your answer.

Greetings, Albert

Please add TZ37 double wall switch

z_wave_tkb_wall_switches_tz56s_tz56d_tz55s_tz55d_tz35s_tz35d_tz36s_tz36d_tz57_tz37_manual.pdf

Thanks and Greetings

manu id: 280
type id: 3
dev id: 3

Hi,

I'm having troubles getting the current status of several TZ66 and TZ56. If I manually turn on the switch, Homey doesn't get the change and I have no poll frequency options.

Is there any way to fix this?

manual: https://www.robbshop.nl/scene-master

When I want to add the TKB Home 55-S single dimmer to Homey I get the following message 'No suitable homey app was found for this device'. Now I can not dim my light. only on off, because homey uses an default z-wave device.

Am I doing something wrong?

Ordered a new TBK Home wall plug dimmer but is was not recognized by the app. It seems this TZ67 dimmer is using the following ID's:

• Fab ID: 280
• Product Type ID: 3
• Product ID: 8

As a test I copied the TZ67 driver with the new ID's and everything seems to work fine. Can you update the app? Thx in advance.

Alexander

Just added a TZ56S (that has been on a Vera previously), reset it and everything, but it appears to be being created as a "Slave", not sure if this is why, but Homey is not reflecting any action performed on the switch itself.